[. . . ] Warning if your car's ignition has no ACC position After turning the ignition off, be sure to press and hold (OFF) on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain. The BBE MP process improves digitally compressed sound, such as MP3, by restoring and enhancing the higher harmonics lost through compression. BBE MP works by generating even-order harmonics from the source material, effectively recovering warmth, detail and nuance. [. . . ] Press M or m repeatedly until "EQ7 Tune" appears, then press (ENTER). Tip You can easily switch among categories by pressing and holding M or m. The following items can be set (follow the page reference for details): "z" indicates the default settings. The volume level is adjustable in 1 dB steps, from ­10 dB to +10 dB. ­ "Normal" (z): to use the rotary commander in the factory-set position. ­ "Reverse": when you mount the rotary commander on the right side of the steering column. AUX Level To adjust the volume level for each connected auxiliary equipment. This setting negates the need to adjust the volume level between sources. ­ "ALL": to step repeatedly through the display images in all display modes. ­ "SA": to step repeatedly through the display images of Spectrum analyzer. ­ "Movie": to step repeatedly through the display images of Movie mode. iNFO (Display Information) To display the items (depending on the source , etc. ­ "Auto" (z): to dim the display automatically when you turn lights on. Unit number Disc number Local (Local seek mode) ­ "on": to only tune into stations with stronger signals. The labelling is complete and the display returns to normal play mode. " · The Disc Memo always takes priority over any prerecorded title. You can label a disc on the unit if a changer with the CUSTOM FILE function is connected. "Repeat Track" and all shuffle play are suspended until the labelling is complete. Repeat and shuffle play (With the card remote commander) 1 Select the unit that has stored the custom name you want to delete, then press (MENU). 2 Press M or m repeatedly until "Name Delete" appears, then press (ENTER). *2 When one or more CD changers, or two or more MD changers are connected. To return to normal play mode, select "Repeat off" or "Shuffle off. [. . . ] Before going through the checklist below, check the connection and operating procedures. If the unit is turned off and the display disappears, it cannot be operated with the remote commander. An optional power amplifier is connected and you are not using the built-in amplifier. The leads are not matched correctly with the car's accessory power connector. [. . . ]